Publikationen in wissenschaftlichen Zeitschriften

• M. Rabiey, C. Walter, F. Kuster, J. Stirnimann, F. Pude, K. Wegener, Dressing of Hybrid Bond CBN Wheels Using Short-Pulse Fiber Laser, Strojniški vestnik - Journal of Mechanical Engineering, 2012, Band in press, [BibTeX]
  
  
• M. Akbari, S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Thermomechanical Analysis of Residual Stresses In Brazed Diamond Metal Joints Using Raman Spectroscopy And Finite Element Simulation, Mechanics of Materials, 2012, USA, ISSN 0167-6636, DOI http://dx.doi.org/10.1016/j.mechmat.2012.04.010, Band 52, Nr. C, [BibTeX]
  
  
• R. Transchel, C. Dold, M. Rabiey, K. Wegener, Relevance of laser touch-dressed diamond tools for the dressing performance of vitrified-bonded silicon carbide, International Journal of Abrasive Technology, 2012, Band 5, Nr. 1, Seiten 48 - 61, [BibTeX][Abstract]
  
  
• C. Walter, M. Rabiey, M. Warhanek, N. Jochum, K. Wegener, Dressing and truing of hybrid bonded CBN grinding tools using a short-pulsed fibre laser, CIRP Annals - Manufacturing Technology, 2012, Hong Kong, Band (in press), [BibTeX]
  
  
• N. Jufer, D. Politze, J. Bathelt, A. Kunz, Performance Factory - A New Approach of Performance Assessment for the Factory of the Future, Estonian Journal of Engineering, 2012, Tallinn, Estland, ISBN 1736-6038, ISSN 1736-7522, DOI 10.3176/eng.2012.1.04, Band 18, Nr. 1, Seiten 42--57, [BibTeX][Abstract][Paper]
  
  
• E. Weingärtner, R. Roth, F. Kuster, M. Boccadoro, F. Fiebelkorn, Electrical discharge dressing and its influence on metal bonded diamond wheels, CIRP Annals - Manufacturing Technology, 2012, Hong Kong, Band (accepted for publication), [BibTeX][Abstract]
  
  
• D. Politze, S. Dierssen, K. Wegener, Function module drivers for assessing the similarity between product functions, CIRP Journal of Manufacturing Science and Technology, 2012, ISSN 1755-5817, DOI http://dx.doi.org/10.1016/j.cirpj.2011.11.001, Band 5, Nr. 1, Seiten 33--40), [BibTeX][Abstract]
  
  
• S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Microstructure, residual stresses and shear strength of diamond–steel-joints brazed with a Cu–Sn-based active filler alloy, International Journal of Refractory Metals and Hard Materials, 2012, ISSN 0263-4368, DOI 10.1016/j.ijrmhm.2011.06.006, Band 30, Nr. 1, Seiten 16--24, [BibTeX][Abstract][Paper]
  
  
• E. Weingärtner, K. Wegener, F. Kuster, Wire electrical discharge machining applied to high-speed rotating workpieces, Journal of Materials Processing Technology, 2012, ISSN 0924-0136, DOI 10.1016/j.jmatprotec.2012.01.005, Band 212, Nr. 6, Seiten 1298-1304, [BibTeX][Abstract]
  
  
• V. Wessels, A. Grigoryev, C. Dold, C. Wyen, R. Roth, E. Weingärtner, F. Pude, K. Wegener, J. Löffler, Abrasive waterjet machining of 3D structures from bulk metallic glasses and comparison with other techniques, Journal of Materials Research, 2011, [BibTeX]
  
  
• A. Kunz, T. Nescher, Future Entertainment Technologies, ACM Computers in Entertainment, 2011, ISSN 1544-3574, DOI 10.1145/2027456.2027457, Band 9, Nr. 3, Seiten 1--4, [BibTeX][Abstract][Paper]
  
  
• A. Spierings, N. Herres, G. Levy, Influence of the particle size distribution on surface quality and mechanical properties in additive manufactured stainless steel parts, The international journal for research on additive manufacturing technologies and rapid product development, 2011, USA, ISSN 1355-2546, DOI 10.1108/13552541111124770, Band 17, Nr. 3, Seiten 195--202, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, Human-Computer Interaction on Tabletops, The SBC Journal on 3D Interactive Systems, 2011, Porto Alegre, Brasilien, ISSN 2236-3297, Band 2, Nr. 2, Seiten 44--47, [BibTeX][Abstract][Paper]
  
  
• C. Wyen, W. Knapp, K. Wegener, A new method for the characterisation of rounded cutting edges, International Journal of Advanced Manufacturing Technology, 2011, Seiten DOI: 10.1007/s00170-011-3555/4, [BibTeX]
  
  
• M. Rabiey, C. Dold, R. Transchel, K. Wegener, Influence of picosecond laser touch dressing of electroplated diamond wheels on the dressing of SiC vitrified bond wheel, Advanced Material Research - Advances in Abrasive Technology XIV, 2011, DOI 10.4028/www.scientific.net/AMR.325.189, Band 325, Seiten 189-194, [BibTeX][Abstract][Paper]
  
  
• K. Wegener, H. Hoffmeister, B. Karpuschewski, W. Hahmann, F. Kuster, M. Rabiey, Conditioning and Monitoring of Grinding Wheels, CIRP Annals 2011, Vol.60/2/2011, P.757, 2011, Budapest, Ungarn, DOI 10.1016/j.cirp.2011.05.003, Band 60, Nr. 2, Seiten 757--777, [BibTeX][Abstract]
  
  
• R. Hufenus, F. Reifler, K. Maniura-Weber, A. Spierings, M. Zinn, Biodegradable Bicomponent Fibers from Renewable Sources: Melt-Spinning of Poly(lactic acid) and Poly[(3-hydroxybutyrate)-co-(3-hydroxyvalerate)], Macromolecular Materials and Engineering, 2011, Weinheim, Deutschland, ISSN 1439-2054, DOI 10.1002/mame.201100063, Band in press, [BibTeX][Abstract]
  
  
• A. Spierings, M. Schneider,, R. Eggenberger,, Comparison of Density Measurement Techniques for Additive Manufactured metallic Parts, Rapid Prototyping Journal, 2011, USA, ISSN 1355-2546, Band 5, Nr. 17, [BibTeX][Abstract]
  
  
• C. Dold, R. Transchel, M. Rabiey, P. Langenstein, C. Jaeger, F. Pude, F. Kuster, K. Wegener, A study on laser touch dressing of electroplated diamond wheels using pulsed picosecond laser sources, CIRP Annals - Manufacturing Technology (2011), 2011, DOI 10.1016/j.cirp.2011.03.117, [BibTeX]
  
  
• T. Nescher, A. Kunz, An interactive whiteboard for immersive telecollaboration, The Visual Computer: International Journal of Computer Graphics, 2011, ISSN 0178-2789, DOI 10.1007/s00371-011-0546-2, Band 27, Nr. 4, Seiten 311--320, [BibTeX][Abstract][Paper]
  
  
• N. Rüttimann, S. Buhl, K. Wegener, Simulation of Single Grain Cutting Using SPH Method, Journal of Machine Engineering, 2011, Polen, Band 10, Nr. 3, Seiten 17--29, [BibTeX]
  
  
• A. Spierings, G. Levy, Rapid Manufacturing - auch mit SLM, RTejournal, 2010, Deutschland, ISSN 1614-0923, Seiten 1294--1300, [BibTeX][Abstract]
  
  
• S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Influence of the brazing parameters on microstructure, residual stresses and shear strength of diamond-metal joints, Journal of Materials Science, 2010, Band 45, Nr. 16, Seiten 4358-4368, [BibTeX][Abstract]
  
  
• E. Weingärtner, S. Jaumann, F. Kuster, K. Wegener, On-machine wire electrical discharge dressing (WEDD) of metal-bonded grinding wheels, The International Journal of Advanced Manufacturing Technology, 2010, ISSN 0268-3768, Band 49, Nr. 9-12, Seiten 1001--1007, [BibTeX][Abstract]
  
  
• C. Leinenbach, H. Schindler, T. Baser, N. Rüttimann, K. Wegener, Quasistatic fracture behaviour and defect assessment of brazed soft martensitic stainless steel joints, Engineering Failure Analysis, 2010, ISSN 1350-6307, Band 17, Seiten 672--682, [BibTeX][Abstract][Paper]
  
  
• E. Brinksmeier,, G. Levy, D. Meyer,, A. Spierings, Surface Integrity of Selective-Laser-Melted Components, CIRP Annals Manufacturing Technology, 2010, Frankreich, DOI 10.1016 /j.cirp.2010.03.131, Band 59, Nr. 1, Seiten 601--606, [BibTeX][Abstract]
  
  
• E. Weingärtner, S. Jaumann, F. Kuster, M. Boccadoro, Special wire guide for on-machine wire electrical discharge dressing of metal bonded grinding wheels, CIRP Annals - Manufacturing Technology, 2010, Pisa, Italien, Band 59, Nr. 1, Seiten 227-230, [BibTeX][Abstract]
  
  
• D. Kono, T. Lorenzer, S. Weikert, K. Wegener, Evaluation of modelling approaches for machine tool design, Precision Engineering, 2009, [BibTeX][Abstract]
  
  
• E. Constanza, A. Kunz, M. Fjeld, Mixed Reality: A Survey, Lecture Notes in Computer Science - Human Machine Interaction - Research Results of the MMI Program, 2009, Berlin / Heidelberg, Deutschland, ISBN 978-3-642-00436-0, Band 5440, Seiten 47--68, [BibTeX][Abstract][Paper]
  
  
• T. Liebrich, W. Knapp, K. Wegener, Calibration of a 3D-ball plate, Precision Eingineering, 2009, Band 33, Nr. 1, Seiten 1-6, [BibTeX][Abstract]
  
  
• T. Lorenzer, S. Weikert, K. Wegener, S. Bossoni, Modeling and evaluation tool for supporting decisions on the design of reconfigurable machine tools, Journal of Manufacturing Systems, 2008, [BibTeX][Abstract]
  
  
• F. Pinto, G. Vargas Evangelista, K. Wegener, Simulation for Optimizing Grain Pattern on Engineered Grinding Tools, Annals of the CIRP, 2008, ISSN 0007-8506, Band 57, Nr. 1, Seiten 353--356, [BibTeX][Abstract]
  
  
• G. Vargas Evangelista, K. Wegener, F. Kuster, T. Schnider, Analysis and optimization of the hard broaching process with diamond tools, International Journal on Mechatronics and Manufacturing Systems, 2008, ISSN 1753-1039, Band 1, Nr. 4, Seiten 365--376, [BibTeX][Abstract]
  
  
• R. Neugebauer,, B. Denkena, K. Wegener, Mechatronic Systems for Machine Tools, Annals of the CIRP, 2007, ISSN 00078506, DOI 10.1016/j.cirp.2007.10.007, Band 56, Nr. 2, Seiten 657--686, [BibTeX][Abstract][Paper]
  
  
• C. Ganser Schwab, T. Kennel, A. Kunz, Digital support for net-based teamwork in early design stages, Journal of Design Research, 2007, USA, ISSN 1748-3050, Band 6, Nr. 1/2, Seiten 150--168, [BibTeX][Abstract][Paper]
  
  
• A. Jönsson, J. Bathelt, G. Broman, Implications of modelling one-dimensional impact by using a spring and damper element, Proceeding of IMechE, 2005, ISSN 1464-4193, Band 219, Nr. 5, Seiten 299--305, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, T. Kennel, A. Mazzone, S. Müller, Workplace to support the teamwork in the early stages of the product development process, Mécanique et Industries, 2004, Schweiz, ISSN 1296-2139, Band 5, Nr. 2, Seiten 181--187, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, Construction of a three-sided immersive telecollaboration system, Presence: Teleoperators & Virtual Environments, 2004, USA, ISSN 1054-7460, Band 13, Nr. 2, Seiten 178--192, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, S. Müller, Einsatz der Informationstechnologie in der FMEA, Konstruktion - Zeitschrift für Produktentwicklung, 2000, ISBN 0005-5953, [BibTeX][Abstract][Paper]
  
  
• M. Schmid, CAD/CAM system designs goldsmith's components, Technica, 1990, ISSN 0184-4067, Band 38, Nr. 22, Seiten 40--43, [BibTeX][Abstract]